ZS routinely performs building enclosure testing services for windows, door, curtain walls, and storefront, air barrier, roofing/waterproofing and masonry wall systems. Using state-of-the-art testing and inspection equipment, ZS professionals have extensive experience performing the testing protocols of the American Architectural Manufacturers Association (AAMA) and the American Society for Testing and Materials (ASTM).
Field testing of the building enclosure determines the quality of the installation work, ensuring that proper specifications were followed during the construction process. Typically, these services are for quality assurance or new building commissioning, however ZS also utilizes testing to identify failures on existing buildings. On new buildings, we perform testing to determine if fenestrations, masonry wall systems, air barriers, roofing, and waterproofing are properly installed and sealed to prevent water leakage and air infiltration.
ZS has extensive experience with the following testing and test standards:
CONSTRUCTION SITE MONITORING
- ASTM E1047 – Standard Practice for Measuring and Assigning Vibration Allowances LiDAR (3D Laser Scanning) Building and Site Existing Conditions Documentation
- Existing Facilities Pre-Construction and Post Construction Survey
WINDOW/CURTAIN WALL
- Infrared (IR) Thermography
- Glass Thickness Measurements and Glass Film Identification
- ASTM E 331 – Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
- ASTM E 547 – Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
- ASTM E 783 – Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
- ASTM E 1105 – Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform or Cyclic Static Air Pressure Difference
- AAMA 501.2 – Quality Assurance and Diagnostic Water Leakage Field Check of Installed Storefronts, Curtain Walls, and Sloped Glazing Systems
- AAMA 502 – Voluntary Specification for Field Testing of Newly Installed Fenestration Products
- AAMA 503 – Voluntary Specification for Field Testing of Newly Installed Storefronts, Curtain Walls, and Sloped Glazing Systems
- AAMA 511 – Voluntary Guideline for Forensic Water Penetration Testing of Fenestration Products
- ASTM C1401 – Standard Guide for Structural Sealant Glazing
WALLS INTERIOR/EXTERIOR
- ASTM C 1601 – Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces
- ASTM C 1715 – Standard Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems
- ASTM E 2128 – Standard Guide for Evaluating Water Leakage of Building Walls
- ASTM D5957 – Standard Guide for Flood Testing Horizontal Waterproofing Installations
- ASTM E1186 – Standard Practices for Air Leakage Site Detection in Building Enclosures and Air Barrier Systems
- ASTM D4541 – Standard Test Method for Pull-Off Strength of Coating Using Portable Adhesion Testers
- ASTM C1521 – Standard Practice for Evaluation Adhesion of Installed Weatherproofing Sealant Joints
ROOFS
- ASTM D7954 – Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Nondestructive Electrical Impedance Scanners
- ASTM F2170 – Standard Test Method for determining relative humidity (RH) in concrete floor slabs using in-situ probes
BUILDING PRESSURIZATION
ABAA Certified Technicians
Whole Building Blower Door Testing / Envelope Leakage Testing
- ASTM E779 – Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
- ASTM E1827 – Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
- ASTM E3158 – Standard Test Method for Measuring the Air Leakage Rate of a Large or Multizone Building
